X13 Box - Brushed Aluminum

Integrate your fire extinguishers into your premises

This X13 decorative protective case in brushed aluminium allows the integration of 6 L, 6 Kg and 2 Kg CO2 fire extinguishers in all types of premises.

Quick assembly and installation

The enclosure is delivered flat in a single box measuring 121 cm wide by 76.5 cm high for easy transport and storage, and to minimize damage. Assembly takes only a few minutes using the "easy-fix" fasteners and the groove system. A drilling template is provided for wall mounting with a 304 mm center-to-center distance at a height of 504 mm, for installations compliant with NF - APSAD service standards. However, the enclosure can also be simply placed on the floor.

Rapid removal of the fire extinguisher in an emergency situation

Two integrated side handles on the case allow for quick removal of the unit. The reduced weight of the assembly facilitates handling during interventions.

Visual check for the presence of the fire extinguisher

A flame-shaped cutout on the front of the box allows the presence of the fire extinguisher to be checked without having to move the box.

Slanted base for easy logo reading and to prevent objects from being placed on it

The upper part of the box has a slight incline which makes it easier to read the fire extinguisher logo and limits the placement of objects on the box .

Regulatory compliance of signage

Regulations require that safety equipment markings be visible, but the fire extinguisher itself must not be directly visible. A fire extinguisher sign with minimum dimensions of 200 x 200 mm can be installed at a height of 2 meters, for example. The "Fire Extinguisher" logo supplied with the cabinet does not fulfill this legal requirement but can be applied by transfer onto the cabinet or any other surface of your choice.

Made in France with reinforced packaging

The X13 case is manufactured by the French company Extinbox. Rigid packaging is added to each case to limit damage during transport.

Features of the X13 Case - Brushed Aluminum:

- Material: Dibond aluminum, brushed effect
- Height: 672 mm
- Width: 341 mm
- Depth: 222 mm
- Weight: 0.460 kg
- Compatibility: 6L, 6Kg and 2Kg CO2 fire extinguishers
- Fixing hole spacing: L 504 x H 304 mm
- Fixing system: "easy-fix" fixings
- Supplied with: drilling template, 6 lid fixing screws, fire extinguisher sticker
- Packaging: delivered flat in a single cardboard box measuring 121 x 76.5 cm

Assembly instructions

- Position the panels flat, with the black grooves facing upwards
- Bend the parts with fixing grooves at 90°
- Insert the "easy-fix" fasteners into the grooves of the case and its upper part
- Hand-tighten the fasteners on the front of the case before tightening those on the sides after folding the case.
- If you wish to mount the box on the wall, use the drilling template.